1. PHYSICAL CHARACTERISTICS
- Appearance: Aerosol - Aerosolized Liquid, Bulk - Liquid - Vapor Density: >1 - Color: Light amber cloudy Liquid - Flash Point: 138° F (59° C)(TCC) - Odor: Characteristic - Percent Volatile: 70-75% by weight - Freeze Point/Pour Point: <-81° F (-63° C)(ASTM D-97) - VOCs: 24.5% by weight - Kinematic Viscosity @ 100° F (38° C): 2.8 cSt - Lower Flammability Limit: 0.6% - Specific Gravity @ 77° F (25° C): 0.81 - Upper Flammability Limit: 8.0% - Boiling Point (initial): 360° F (183° C) - Vapor Pressure: Aerosol: 95-115 psi @ 70° F (21° C) - Bulk: 1 psi @ 100° F (38° C)(ASTM D323)
2. FLUID PROPERTIES - Operating Temperature: -60° F to 300° F (-50° C to 150° C) - Dielectric Strength: 38,000 volts per 0.10 inch - Solubility in Water: Insoluble - Kb Value: 25 - Wet Film Thickness: 50 um (0.002 inch) - Coverage: 600-1000 ft2 per gal - Surface Compatibility: For all variations : WD-40 Multi-Use Product demonstrates none to negligible deleterious effect to plastic, rubber and metal hard surfaces. This includes Acetal, neoprene/hard rubber, HDPE, PPS Copolymer Polysulfone, Teflon, Viton, steel, galvanized steel hot dip, electroplated, copper, brass, magnesium, nickel, tin plate, titanium and zinc. - Surface Cautions: Nearly all surfaces interact with WD-40 Multi-Use Product as they would any high grade aliphatic petroleum spirit. Certain types of rubber will swell upon prolonged immersion. Wax polishes and certain wax coatings may be softened by WD-40 Multi-Use Product. Clear polycarbonate and polystyrene may stress craze or crack. Always test surfaces first.
3. WD-40 MULTI-USE PRODUCT AND THE ENVIRONMENT - WD-40 Multi-Use Product does not contain chloroflurocarbons (CFCs), (HCFCs) - WD-40 Multi-Use Product does not contain Lead (Pb), Mercury (Hg), Cadmium (Cd), Hexavalent Chromium (Cr6), Polybrominated biphenyls (PBB), or Polybrominated diphenylether complying with the restricted substances listed in Article 4(1) of the RoHS Directive. - WD-40 Multi-Use Product contains no ingredients requiring California Prop 65 listing or labeling such as benzene or toluene. - WD-40 Multi-Use Product complies with VOC regulations in all 50 states. - WD-40 Multi-Use Product is inherently biodegradable according to OECD Method 301. - Aerosol products are recyclable, just like any other empty steel container! Thousands of communities now include aerosol product recycling in both household residential and curbside buy-back and drop-off programs. The Steel Recycling Institute recommends recycling empty aerosol cans.